S6 Series Servo-Motor Horizontal Plastic Injection Molding Machine
Product Description
CHARACTERISTIC
·Use royal servo system and save 40%--75%energy. Hydraulic closed loop and motor speed closed loop is realized by control system with the features of high repetition, high linearity, high efficiency, high precision, fast response, low rejection rate, low nose, low vibration and long service life.
·high-rigidity template design, injection unit uses the land bridge structure, it is not easy to produce carryover when machine acts. The structure is stable and firm.
·Oil filter equipment of high performance and high precision can keep the grease within NAS8.
Product performance and advantages:
1.injection unit
Short and forceful double-cylinder injection system is used to ensure the steady injection motions. High rigidity bridge structure injection base the strain free fixed mold plate and screw assembly with optimized design help to reach better plasticating capacity and effect.
2.MOLD LOCKING UNIT
The new generation mold lacking device and computer emulation optimized parameter makes motions of the moving plate fast and steady when combining the box type moving anti-fatigue is secured.
3.HYDRAULIC UNIT
High efficiency, energy-saving and high precise proportional pressure and flow variable displacement pump system male the out of the hydraulic system matching the required power for entire machine operation without loss of high pressure throttle and overflow energy.
4.CONTROL SYSTEM
professional injection molding machine controller with software and hardware of industrial standard is convenient to expansion and revision of performance.
Parameters Table
Model | UNIT | LOG-90S6 | LOG-110S6 | LOG-130S6 | LOG-160S6 | LOG-210S6 | LOG-250S6 | |||||||||||||
International recognized model | | 275/90 | 370/110 | 416/130 | 525/160 | 830/210 | 1140/250 | |||||||||||||
INJECTION | | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
Shot volume | cm3 | 113 | 154 | 181 | 163 | 192 | 235 | 215 | 263 | 302 | 277 | 318 | 392 | 381 | 470 | 569 | 510 | 687 | 863 | |
Injection | Shot weight | g | 106 | 144 | 170 | 148 | 175 | 213 | 196 | 239 | 274 | 260 | 298 | 368 | 347 | 429 | 520 | 464 | 625 | 785 |
volume | | | | | | | | | | | | | | | | |||||
| ps | Oz | 3.7 | 5.1 | 5.9 | 5.2 | 6.2 | 7.5 | 6.9 | 8.4 | 9.6 | 9.1 | 10.5 | 12.9 | 12.1 | 15 | 18.1 | 16.2 | 21.8 | 27.4 |
Screw diameter | mm | 30 | 35 | 38 | 35 | 38 | 42 | 38 | 42 | 45 | 42 | 45 | 50 | 45 | 50 | 55 | 50 | 58 | 65 | |
Injection pressure | mpa | 243 | 179 | 152 | 228 | 193 | 158 | 193 | 158 | 138 | 190 | 166 | 135 | 217 | 176 | 145 | 224 | 166 | 132 | |
Screw L:D ratio | | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 21:01 | 21:01 | 18.7:1 | |
Screw stroke | mm | 160 | 170 | 190 | 200 | 240 | 260 | |||||||||||||
Screw rotate speed | r/min | 0-180 | 0-180 | 0-180 | 0-200 | 0-200 | 0-180 | |||||||||||||
| | | | | | |||||||||||||||
Clamping force | kn | 900 | 1100 | 1300 | 1600 | 2100 | 2500 | |||||||||||||
Opening stroke | mm | 320 | 350 | 380 | 430 | 480 | 520 | |||||||||||||
Platen size | mm*mm | 540*540 | 600*550 | 610*610 | 680*680 | 745*745 | 820*790 | |||||||||||||
Space between tie bars | mm*mm | 360*360 | 405*370 | 410*410 | 460*460 | 510*510 | 560*530 | |||||||||||||
Mold thickness | mm | 150-360 | 150-380 | 150-430 | 180-500 | 200-550 | 200-580 | |||||||||||||
Platen Max stroke | mm | 680 | 730 | 810 | 930 | 1030 | 1100 | |||||||||||||
Ejection stroke | mm | 100 | 100 | 120 | 140 | 150 | 150 | |||||||||||||
Ejection force | kn | 31 | 42 | 42 | 50 | 67 | 67 | |||||||||||||
| | | | | | |||||||||||||||
Hydraulic system pressure | mpa | 16 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | |||||||||||||
Pump motor | kw | 9 | 11 | 11 | 15 | 18.5 | 22 | |||||||||||||
Heating power | kw | 6.5 | 7.5 | 7.7 | 12.6 | 13.1 | 16 | |||||||||||||
Number of temp.control | | 3+nozzle | 4-nozzle | 4+nozzle | 4+nozzle | 4+nozzle | 5+nozzle | |||||||||||||
| | | | | | |||||||||||||||
Cycle time | sec | 1.1 | 1.3 | 1.3 | 2 | 4.5 | 4.8 | |||||||||||||
Oil tank capacity | L | 160 | 200 | 200 | 210 | 310 | 380 | |||||||||||||
Machine dimensions | m*m*m | 4.2*1.1*1.7 | 4.2*1.2*1.8 | 4.6*1.2*1.8 | 4.95*1.25*2.0 | 5.4*1.32*2.1 | 6.2*1.46*2.15 |
Configuration Table
DENOMINATION | MANUFACTURER OR BRAND | PLACE OF ORIGIN |
SERVO PUMP | ECKERLE | GERMANY |
OIL MOTOR | INTERMOT | ITALY JOINT VENTURE |
DIRECTION VALVE | VICKERS | AMERICA |
COMPUTER | TECHMATION Q7 | TAIWAN |
AUTOMATIC SWITCH | SCHNEIDER | SHANGHAI SCHNEIDER |
THERMALRELAY,PROXINITY SWITCH | SCHNEIDER | SHANGHAI SCHNEIDER |
AC CONTACTOR | SCHNEIDER | SHANGHAI SCHNEIDER |
POSITION SWITCH | SCHNEIDER | SHANGHAI SCHNEIDER |
ELECTRONIC RULER | JS | JAPAN JOINT VENTURE |
SINGLE-POLE,DOUBLE-POLE SWITCH | ABB | BEIJING ABB |
| | |
SEALING ELEMENTS | HALLITE | UK |
LUBICATION PUMP | SEAWAVW | JAPAN JOINT VENTURE |
Contact us if you need more details on Servo Motor Injection Machines. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Servo Motor Moulding Machines、Servo-motor Plastic Machines. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Injection Moulding Machine
Premium Related Products
Other Products
Hot Products
car winch 10000lb/11000lb/12000lb/12500lbplastic cap compression molding machineMolds For Electrical FansPlastic Mist Micro-SprayersPreforms For ContainerO Ring And Rubber GasketExtrusion Line For PPR LineSpecialized Plastic Injection Molding MachinessStandard Industrial Cooling TowersS6 Series Servo-Motor Horizontal Plastic Injection Molding MachinePlastic Parts CrusherPVC Fitting MouldsThreaded Fitting MouldsPVC Pipe Fitting MouldsPPR Pipe Fitting MouldsFlare Type Fitting Mold