S8 Series Servo-Motor Horizontal Plastic Injection Molding Machine
Product Description
Series: S8 series
Feature:
●Adopting YUNENG servo motor saving energy 40%~75% effectively, using oil pressure and motor speed close loop control system, high repetition and high linearity which reduce the plastic defective index, response fast, raise the production efficiency, improve the accuracy of the overall control, low-noise, low vibration,extend the service life of injection molding machine;
●Template structure of the high-rigidity design, both T-slots and conventional screw holes make mold is easy to install;
●High-precision and high performance oil filter equipment makes the hydraulic oil clean and maintains it within NAS8;
Product performance and advantages:
1. Servo energy-saving system
●Using the servo motor oil electricity composite structure
2. Servo motor high response feature
●It costs only 0.05s for servo energy saving injection molding machines to achieve the maximum output, in comparison with conventional hydraulic injection molding machines. The response speed has been obviously increased, improving the production efficiency.
3. Unique function
●Large colored screen with TFT interface
●Full automatic close-loop control
●Module design of hardware
●Auto-tune PID temperature control
●Pc interface USB, PIC, and FLASH-
●Curve monitoring and analysis function
●K-can data transmission (500Kbit/s)
●On-line central monitoring function
Parameters Table
Model | UNIT | LOG-90S8 | LOG-110S8 | LOG-130S8 | LOG-160S8 | LOG-210S8 | LOG-250S8 | LOG-300S8 | LOG-320S8 | LOG-500S8 | LOG-650S8 | LOG-900S8 | LOG-1100S8 | LOG-1500S8 | LOG-1800S8 | LOG-2200S8 | ||||||||||||||||||||||||||||||||||||
International recognized model | | 275/90 | 370/110 | 416/130 | 525/160 | 830/210 | 1140/250 | 1400/300 | 1870/320 | 3240/500 | 4640/650 | 7038/900 | 9080/1100 | 10900/1500 | 13900/1800 | | ||||||||||||||||||||||||||||||||||||
INJECTION | | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | D | A | B | C | D | A | B | C | D | A | B | C | A | B | C | D | ||
Shot volume | cm3 | 113 | 154 | 181 | 163 | 192 | 235 | 215 | 263 | 302 | 277 | 318 | 392 | 381 | 470 | 569 | 510 | 687 | 863 | 740 | 929 | 1077 | 1062 | 1231 | 1414 | 1590 | 2042 | 2550 | 2160 | 2734 | 3376 | 3179 | 3825 | 4750 | 5625 | 4123 | 4989 | 5938 | 6968 | 5464 | 6503 | 7632 | 8851 | 8495 | 9852 | 11310 | 13183 | 15000 | 16933 | 24192 | ||
Injection | Shot weight | g | 106 | 144 | 170 | 148 | 175 | 213 | 196 | 239 | 274 | 260 | 298 | 368 | 347 | 429 | 520 | 464 | 625 | 785 | 673 | 845 | 980 | 966 | 1120 | 1286 | 1494 | 1919 | 2397 | 1966 | 2488 | 3072 | 2893 | 3571 | 4321 | 5143 | 3751 | 4540 | 5403 | 6340 | 4972 | 5918 | 6945 | 8054 | 7730 | 8965 | 10292 | 12043 | 13700 | 15468 | 22075 | |
volume | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |||||
| ps | Oz | 3.7 | 5.1 | 5.9 | 5.2 | 6.2 | 7.5 | 6.9 | 8.4 | 9.6 | 9.1 | 10.5 | 12.9 | 12.1 | 15 | 18.1 | 16.2 | 21.8 | 27.4 | 23.5 | 29.5 | 34.2 | 33.7 | 39.2 | 44.9 | 52.3 | 67.2 | 83.9 | 68.8 | 87.1 | 107.5 | 102.5 | 126.5 | 153 | 182.1 | 132.8 | 160.8 | 191.4 | 224.5 | 176.2 | 210 | 246 | 285.3 | 273.8 | 317.5 | 364.5 | 422 | 480 | 542 | 774 | |
Screw diameter | mm | 30 | 35 | 38 | 35 | 38 | 42 | 38 | 42 | 45 | 42 | 45 | 50 | 45 | 50 | 55 | 50 | 58 | 65 | 58 | 65 | 70 | 65 | 70 | 75 | 75 | 85 | 95 | 80 | 90 | 100 | 90 | 100 | 110 | 120 | 100 | 110 | 120 | 130 | 110 | 120 | 130 | 140 | 130 | 140 | 150 | 150 | 160 | 170 | 185 | ||
Injection pressure | mpa | 243 | 179 | 152 | 228 | 193 | 158 | 193 | 158 | 138 | 190 | 166 | 135 | 217 | 176 | 145 | 224 | 166 | 132 | 190 | 151 | 130 | 175 | 152 | 133 | 204 | 159 | 127 | 215 | 170 | 138 | 227 | 184 | 152 | 128 | 220 | 182 | 153 | 130 | 22 | 168 | 143 | 123 | 164 | 142 | 123 | 186 | 164 | 145 | 153 | ||
Screw L:D ratio | | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 20:01 | 20:01 | 18:01 | 21:01 | 21:01 | 18.7:1 | 22:01 | 22:01 | 20:01 | 21:01 | 21:01 | 19.6:1 | 21:01 | 21:01 | 18.7:1 | 21:01 | 21:01 | 19:01 | 22:01 | 22:01 | 20:01 | 18.3:1 | 22:01 | 22:01 | 20.2:1 | 18.6:1 | 26.2:1 | 24:01:00 | 22.2:1 | 20.6:1 | 24:01:00 | 22.3:1 | 20.8:1 | 23.5:1 | 22:01 | 20.7:1 | 22:01 | ||
Screw stroke | mm | 160 | 170 | 190 | 200 | 240 | 260 | 300 | 320 | 360 | 430 | 500 | 525 | 575 | 640 | 750 | 750 | 750 | 750 | |||||||||||||||||||||||||||||||||
Screw rotate speed | r/min | 0-180 | 0-180 | 0-180 | 0-200 | 0-200 | 0-180 | 0-150 | 0-150 | 0-150 | 0-125 | 0-120 | 0-110 | 0-98 | 0-87 | 0-80 | 0-80 | 0-80 | 0-60 | |||||||||||||||||||||||||||||||||
| | | | | | | | | | | | | | | ||||||||||||||||||||||||||||||||||||||
Clamping force | kn | 900 | 1100 | 1300 | 1600 | 2100 | 2500 | 3000 | 3200 | 5000 | 6500 | 9000 | 11000 | 15000 | 18000 | 22000 | ||||||||||||||||||||||||||||||||||||
Opening stroke | mm | 320 | 350 | 380 | 430 | 480 | 520 | 570 | 615 | 780 | 920 | 1050 | 1150 | 1500 | 1610 | 1850 | ||||||||||||||||||||||||||||||||||||
Platen size | mm*mm | 540*540 | 600*550 | 610*610 | 680*680 | 745*745 | 820*790 | 870*850 | 945*945 | 1180*1180 | 1320*1290 | 1530*1530 | 1650*1650 | 2090*2050 | 2230*2100 | 2450x2300 | ||||||||||||||||||||||||||||||||||||
Space between tie bars | mm*mm | 360*360 | 405*370 | 410*410 | 460*460 | 510*510 | 560*530 | 610*590 | 660*660 | 830*830 | 930*900 | 1080*1030 | 1150*1100 | 1450*1350 | 1550*1430 | 1750x1600 | ||||||||||||||||||||||||||||||||||||
Mold thickness | mm | 150-360 | 150-380 | 150-430 | 180-500 | 200-550 | 200-580 | 200-600 | 250-670 | 300-820 | 350-910 | 400-1100 | 450-1200 | 700-1400 | 700-1500 | 700-1700 | ||||||||||||||||||||||||||||||||||||
Platen Max stroke | mm | 680 | 730 | 810 | 930 | 1030 | 1100 | 1170 | 1285 | 1600 | 1830 | 2150 | 2350 | 2900 | 3100 | 3550 | ||||||||||||||||||||||||||||||||||||
Ejection stroke | mm | 100 | 100 | 120 | 140 | 150 | 150 | 160 | 160 | 210 | 265 | 300 | 350 | 350 | 400 | 420 | ||||||||||||||||||||||||||||||||||||
Ejection force | kn | 31 | 42 | 42 | 50 | 67 | 67 | 77 | 77 | 111 | 182 | 270 | 270 | 318 | 318 | 500 | ||||||||||||||||||||||||||||||||||||
| | | | | | | | | | | | | | | ||||||||||||||||||||||||||||||||||||||
Hydraulic system pressure | mpa | 16 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 16 | 16 | 17.5 | ||||||||||||||||||||||||||||||||||||
Pump motor | kw | 9 | 11 | 11 | 15 | 18.5 | 22 | 22 | 30 | 45 | 55 | 37+37 | 45+45 | 37+37+37 | 37+37+30+30 | 55+55+55 | ||||||||||||||||||||||||||||||||||||
Heating power | kw | 6.5 | 7.5 | 7.7 | 12.6 | 13.1 | 16 | 18 | 21.5 | 35.4 | 38.3 | 58.45 | 68.45 | 85.55 | 95.05 | 100 | 135 | |||||||||||||||||||||||||||||||||||
Number of temp.control | | 3+nozzle | 4-nozzle | 4+nozzle | 4+nozzle | 4+nozzle | 5+nozzle | 5+nozzle | 5+nozzle | 5+nozzle | 6+nozzle | 6+nozzle | 6+nozzle | 6+nozzle | 6+nozzle | 7+nozzle | ||||||||||||||||||||||||||||||||||||
| | | | | | | | | | | | | | | ||||||||||||||||||||||||||||||||||||||
Cycle time | sec | 1.1 | 1.3 | 1.3 | 2 | 4.5 | 4.8 | 5 | 5 | 5.2 | 6 | 8 | 10 | 14 | 18 | 18 | ||||||||||||||||||||||||||||||||||||
Oil tank capacity | L | 160 | 200 | 200 | 210 | 310 | 380 | 380 | 500 | 1150 | 1500 | 1900 | 2300 | 2900 | 3000 | 4100 | 4100 | |||||||||||||||||||||||||||||||||||
Machine dimensions | m*m*m | 4.2*1.1*1.7 | 4.2*1.2*1.8 | 4.6*1.2*1.8 | 4.95*1.25*2.0 | 5.4*1.32*2.1 | 6.2*1.46*2.15 | 6.4*1.6*2.18 | 6.8*1.63*2.25 | 9.2*1.85*2.41 | 9.6*1.9*2.3 | 11*2.4*3.1 | 12.5*2.8*3.5 | 13.9*3.2*4.7 | 14.2*3.4*5.1 | 17.5x4.2x3.7 | 18.5x4.8x4.3 |
Configuration Table
DENOMINATION | MANUFACTURER OR BRAND | PLACE OF ORIGIN |
SERVO PUMP | ECKERLE | GERMANY |
OIL MOTOR | INTERMOT | ITALY JOINT VENTURE |
DIRECTION VALVE | VICKERS | AMERICA |
COMPUTER | TECHMATION Q8 | TAIWAN |
AUTOMATIC SWITCH | SCHNEIDER | SHANGHAI SCHNEIDER |
THERMALRELAY,PROXINITY SWITCH | SCHNEIDER | SHANGHAI SCHNEIDER |
AC CONTACTOR | SCHNEIDER | SHANGHAI SCHNEIDER |
POSITION SWITCH | SCHNEIDER | SHANGHAI SCHNEIDER |
ELECTRONIC RULER | GEFRAN | ITALY |
SINGLE-POLE,DOUBLE-POLE SWITCH | ABB | BEIJING ABB |
| | |
SEALING ELEMENTS | HALLITE | UK |
LUBICATION PUMP | HERG | JAPAN JOINT VENTURE |
Contact us if you need more details on Servo-motor Injection Machines. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Servo-motor Moulding Machines、Servo-motor Plastic Machines. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Injection Moulding Machine
Premium Related Products
Other Products
Hot Products
car winch 10000lb/11000lb/12000lb/12500lbplastic cap compression molding machineMolds For Electrical FansPlastic Mist Micro-SprayersPreforms For ContainerO Ring And Rubber GasketExtrusion Line For PPR LineSpecialized Plastic Injection Molding MachinessStandard Industrial Cooling TowersS6 Series Servo-Motor Horizontal Plastic Injection Molding MachinePlastic Parts CrusherPVC Fitting MouldsThreaded Fitting MouldsPVC Pipe Fitting MouldsPPR Pipe Fitting MouldsFlare Type Fitting Mold